Running an overflow-lot shuttle that actually works
Loop timing, signage and headcounts for fairs and festivals.
When your event outgrows its parking lot, a shuttle from an overflow lot is the fix. Done right, guests barely notice it. Done wrong, you get a long line in the sun and a lot of unhappy reviews. Here’s how to plan one that works.
Step 1: Estimate your peak hour
Your total attendance matters less than your busiest hour. Most events see a rush in the first hour or two and again at closing. Estimate how many people will use the overflow lot during that peak; that’s the number your shuttle has to handle.
Step 2: Time one loop
A loop is the full cycle: load at the lot, drive to the event, unload, and drive back.
- Loading a full bus takes about 5–8 minutes
- Unloading takes about 3–5 minutes
- Add the drive time in both directions
Example: a 7-minute drive each way, plus about 12 minutes for loading and unloading, gives a 26-minute loop, a bit over two loops per hour per bus.
Step 3: Do the bus math
Capacity per hour = seats × loops per hour. A 72-seat Full-Size bus with adult riders (about 48 per run) on a 26-minute loop moves roughly 110 people an hour. Divide your peak-hour estimate by that number to get your bus count.
| Peak hour riders | 26-min loop | Buses needed |
|---|---|---|
| Up to ~110 | 48 adults per run | 1 Full-Size |
| ~110–220 | 48 adults per run | 2 Full-Size |
| ~220–330 | 48 adults per run | 3 Full-Size |
Running two or more buses also means a bus is always loading, so guests rarely wait more than 10–15 minutes.
Step 4: Signage and staffing
- Put a “Shuttle parking” sign at every entrance to the overflow lot
- Mark a clear pickup point with a tall sign or flag at both ends
- Post the last shuttle time at the event entrance and at the lot
- Staff the lot with one volunteer to line up riders and count heads
- Keep a path for strollers and wheelchair users, and tell us in advance if anyone needs extra time to board
Step 5: Plan the close
The end of the event is when shuttles fail. Everyone leaves at once, and it’s getting dark. Keep all buses running until the lot is empty, announce the last shuttle 30 minutes ahead, and have the volunteer at the event gate confirm no one is left before the final run.
What we’ve seen work
On one Chicago volunteer event, we moved about 200 people from an overflow lot all day with simple loops and a volunteer at each end, at a fraction of what coaches would have cost.
Planning a festival or fair? Send us the lot address, the venue and your expected attendance, and we’ll suggest the number of buses and loop schedule.
Get a free quote →